Model LDM-50XY Dual Axis laser diameter micrometer, can Online measurement and control. Dual Axis laser diameter micrometer is the high-accuracy installment that uses the laser scan to carry on the no-contacts on-line measurement. It (namely X axis and Y axis) simultaneously measure the diameter in two directions. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc. It is overcomes the shortcomming of bi-directional measurement. The display unit can simultaneously show the diameter mean value and roundness of wire and pipe. 1. Technical parameters Model Measuring Range Resolution Accuracy LDM-25XY 0.1-20mm 0.001 0.001mm LDM-50XY 0.2-45mm 0.001 0.002mm 2. The performance indicators Measurement: Laser scanning Laser: Visible red semiconductor laser Laser output power: <2mW Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz Operating temperature: -10 ~ 40 Degrees Celsius Humidity: <85% RH Work mode: continuous Power consumption: <30W Dimensions: LDM25XY/LDM50XY Gauge head: 400mm * 400mm * 80mm Support: 350mm * 200mm * (700-1000)mm Height of central measuring position: 900-1200mm 3. Characteristics 1). Can be connected PLC, industrial computer. 2). RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect. 3). Can be equipped remote controller DDC-3, DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption. 4. Display Controller (Model:DDC-3, DDC-5) 1). It be used to remote display and control. 2). Applicable to DC motors, VVVF motor. 3). The controller can control the speed of extruder or the tractor according to the diameter tolerance. 4). Can simultaneously measure the outside diameter, roundness, runout, including oval diameter. It can be used for shaft testing, the detection of rubber roller, honeycomb ceramic detection. Signal distance: more than 500m Output voltage: plus/minus 10V External dimensions: 164mm * 85mm * 280mm (Model:DDC-3) 100mm * 100mm * 120mm (Model:DDC-5)